The prospect of the precision casting industry is that the specifications, models, and dent styles of stainless steel precision casting are effectively the same as the outer plate of its products. In application, the key is that the wax mold is mainly used for industrial production of wax pressed plates. Therefore, when selecting, its melting point is not too high and the hardness testing method is not high. In application, aluminum alloy profiles with relatively affordable prices and lighter quality are used as the mold shells for South Pi carbon steel precision casting parts.

During the production and processing of stainless steel precision casting, it is necessary to effectively refine the surrounding capacity of its wax molds. After effective grinding and polishing during application, several single wax molds are glued to the pre planned top of the mold. High wear-resistant iron precision casting parts are also industrial wax solid core digital models produced and processed using wax molds.

Stainless steel precision casting can effectively apply industrial glue to several wax molds on the head of the already clear mold, and then evenly apply a layer of fine sand. This sand particle is small and very fine, which can ensure that the surface of the clear rough embryo is as smooth and detailed as possible.

After the first successful sand spraying and natural drying of stainless steel precision casting, industrial glue is applied again on the surface of the wax mold during the application stage. Then, a second layer of sand is effectively applied, and the particle size is larger and coarser than the previous layer of sand. After applying the second layer of sand, the wax mold is allowed to dry naturally under clear temperature control.

After the second sand coating and natural air drying, the stainless steel precision casting process is sequentially deduced to complete the third sandblasting treatment, fourth sandblasting treatment, and fifth sandblasting treatment. Subsequently, the number of sandblasting treatments should be effectively adjusted based on the specifications of its volume, surface regulations, and net weight. Generally, the number of sandblasting treatments is 3-7.